Euro V Displacement, 440HP 50Ton Tractor Unit, Made in China by Shacman
BASIC FEATURE
Driving System: 4x2
Engine: Cummins 440HP
Gearbox: Fast
Horse Power: 440HP
Emission Standard: Euro V
Gross Combination Weight: 50 Ton
Item | CabType | Sleeper Cab |
Wheel Base | 3600 mm | |
Drive System | 4X2 | |
Engine | Model | ISM11E5440 |
Horse Power | 440HP | |
Displacement | 10.8L | |
Number of Cylinder | 6 | |
Max Torque | 2080 N.m | |
Max.Torque Speed | 1100-1500 rpm | |
Weight | Empty Vehicle Weight | – |
Load Weight | – | |
Gross Combination Weight | 50 Ton | |
Transmission | Model | 12JSD200T-B |
Type | 12 forward and 2 reverse speed | |
Frame(mm) | (940-850)×300(single 8)mm | |
Rear Axle | 13T Double Reduction MAN3.866 | |
Front Axle | MAN 7.5T | |
Suspension(Front/Rear) | Multi leaf springs | |
Tire(Front/Rear) | 12R22.5 | |
FuelTank | Material | Alluminum |
Capacity | 400L | |
Calculated Performance | Max. Speed(km/h) | 100 |
Fuel Saving Speed(km/h) | 50-70 | |
Notes: | ||
1.This vehicle specifications may differ per country and allow for producton tolerance. 2.Curb vehicle weight includes weight of oil. fuel, coolant and spare tire carrier & bracket, spare tire but exclude standard tool set. 3.Tinfor Automobile Co.,Ltd reserves the right of making change in specifications without notice at any time |
AVAILABLE CERTIFICATE FOR SHACMAN F3000 SEMI TRACTOR
Cummins ISM Engines
Cummins ISM series engines integrates the five key subsystem: Intake air handling system. Intake air handling system, combustion optimization system, electronic control system, fuel system, filtering system and post processing system.
Economical Hande Axle
Hyperbolic gear structure, axle assembly gear ratios of 3.336 3.7 4.111 4.625 with high transmission efficiency, suitable for the development trend of low speed and high horsepower engines. Transmission efficiency 10% higher than competing domestic products with 10%-17% less fuel consumption.
FAST Gearbox
Large center distance 10/12 gear transmission with unique twin shaft structure. The transmissions are advanced and reliable and designed with low speed ratio allowing greater climbing ability, efficient transportation, and lower fuel consumption; especially suitable for long distance transportation and tough working condition
MAN Technology Driving Cab
Air Intake Volume 20% above competitors, remarkable engine cooling capabilities
Shacman semi truck manufacturing base was located in Xi'an, Shaaxi Province. It covers 4 million square meter with over 26,000 employees working there.
Here is the video of Shacman factory inside.